Layout Table~~~~107511~107511~~

Banner~~~~107511~107554~~

space~~~~107511~107553~~

Page Breadcrumb~~~~107511~107552~~

New Layout Table~~~~107511~107551~~

Powerware - 5115i 500-1500VA~

• 1U rack height conserves valuable rack space
• Unique chassis design adapts to rackmount, wall mount, side cabinet (zero U), and bench top applications
• ABM® Technology significantly extends battery service life
• True sine wave output delivers smooth, continuous power
• Buck and Boost Automatic Voltage Regulation corrects incoming voltage fluctuations
• Load segments enable scheduled shutdowns and extend backup time for critical devices
• Hot-swappable batteries minimize downtime, simplify service and extend service life of UPS
• Standard USB and RS232 serial ports extend communication capacity
• X-Slot™ card communication options extend power management capability
• Power management software (included) ensures data integrity
• Provides investment protection with a two-year limited warranty,
• 10-year pro-rated warranty, $150,000 load protection guarantee (U.S. and Canada)

Details & Datasheet...

Powerware 5115i

500VA

750VA

1000VA

1500VA

~~~107511~107550~~

New Layout Table~~~~107511~107549~~

Product Header~

Code

Power

Topology

Voltage

Frequency

~~~107511~107548~~

Powerware - 5115i 500VA~

PW5115iRM-500VA

500VA

Line Interactive

230V

50/60Hz

~The Powerware 5115i Rackmount UPS delivers reliable backup power for all IT devices in the network system. As more and more IT devices are in Rackmount configurations an effective space saving UPS is needed to ensure clean power.

The Powerware 5115i RM design provides high power density, only occupying 1U (45 mm), which conserves valuable space in the rack for other equipment.

Powerware 5115i RM protects against five of the nine basic power problems that could harm your equipment or result in corrupted data

Line Interactive

1	2	3	4	5
Power Failure	Power Sag	Power Surge	Under Voltage	Over Voltage

Features:

• 1U rack height conserves valuable rack space
• Unique chassis design adapts to rackmount, wall mount, side cabinet (zero U), and bench top applications
• ABM® Technology significantly extends battery service life
• True sine wave output delivers smooth, continuous power
• Buck and Boost Automatic Voltage Regulation corrects incoming voltage fluctuations
• Load segments enable scheduled shutdowns and extend backup time for critical devices
• Hot-swappable batteries minimize downtime, simplify service and extend service life of UPS
• Standard USB and RS232 serial ports extend communication capacity
• X-Slot™ card communication options extend power management capability
• Power management software (included) ensures data integrity
• Provides investment protection with a two-year limited warranty,
• 10-year pro-rated warranty, $150,000 load protection guarantee (U.S. and Canada)

Product Number	PW5115i-500VA
Capacity	500VA / 320W
Dimensions (HxWxD)	1.73 x 17.3 x 22.8 in
Unit Weight	35.2/15.9 lb/kg
Input Connections	IEC-320-10A
Output connections	(4) IEC-320-10A (C13)
Electrical Input
Nominal voltage	230V models are 220V, 230V or 240V user-selectable
Input voltage ranges	+\- 20% for nominal voltage at full load for user-selectable voltages
Operating frequency	50/60Hz, Auto-sensing
Frequency range	46-65Hz
Electrical Output
On utility voltage regulation	-10% to +6% of nominal
On battery voltage regulation	±5% RMS
Voltage wave shape (on battery)	Sine wave
Output protection	Electronic current limit
Communications
User interface	LED status display with AC power on, load Group, Overload, On Battery and General Alarm indicators, Site Wiring Fault Indicator on rear panel for low volt models.
Audible alarms	For various UPS alarm conditions, including: On Battery, Low Battery, Overload, UPS fault
Network transient protector	UL 497 A, In/out jacks RJ45 (high voltage models network protection) & RJ11 (low voltage models modem protection)
X-Slot optional	ConnectUPS-X Web/SNMP/xHub Card;
Communication cards	USB card ; X-Slot Relay card
Standard communications	1 x RS-232 Serial Port & 1 x USB Port
Cable	6-foot communications cable included
Power Management Software	Powerware Software Suite CD-ROM (bundled with UPS)
Battery
Battery type;	Sealed, lead-acid; maintenance free
Battery run time	See Battery Run Time chart
Battery replacement	Hot-swappable internal batteries
Recharge time	<3 hours to 90% usable capacity
Start-on-battery	Allows start of UPS without utility input
General
Diagnostics	Self-test @ power up
Transfer time	2-4 ms typical
Dimensions and weights	See Model Selection Guide
Overload (normal operation)	110% overload, shutdown after 3 minutes. 150% overload, shut down 10 cycles
Environmental
Safety markings	C-Tick; CE, TUV, cUL, UL
Safety conformance	UL1778, UL 497A (data lineonly); cUL (CAN/CSA C22.2, No. 107.1); EN 50091-1-1 and IEC 60950
EMC compliance	EN 50091-2. FCC Part 15subpart J Class A , ICES-003
Operating temperature	0 to 40º C (32 to 104º F)
Storage temperature	-15 to 50º C (5 to 122º F)
Relative humidity	5% to 95% non-condensing
Surge suppression	ANSI C62.41 Category A(formerly IEEE 587)
Audible noise	Less than 40 dBA typical
Altitude	Up to 3000M (10,000 ft) without derating

Powerware 5115 RM UPS File size 1.5 MB

Datasheet

Datasheet

Click on the link below to go to the page where this product can be found.

~500VA Line Interactive 230V 50/60Hz|PW5115iRM-500VA|~107511~107547~PWB5115i, 1U, Rackbox~

Powerware - 5115i 750VA~

PW5115iRM-750VA

750VA

Line Interactive

230V

50/60Hz

~The Powerware 5115i Rackmount UPS delivers reliable backup power for all IT devices in the network system. As more and more IT devices are in Rackmount configurations an effective space saving UPS is needed to ensure clean power.

The Powerware 5115i RM design provides high power density, only occupying 1U (45 mm), which conserves valuable space in the rack for other equipment.

Powerware 5115i RM protects against five of the nine basic power problems that could harm your equipment or result in corrupted data

Line Interactive

1	2	3	4	5
Power Failure	Power Sag	Power Surge	Under Voltage	Over Voltage

Features:

• 1U rack height conserves valuable rack space
• Unique chassis design adapts to rackmount, wall mount, side cabinet (zero U), and bench top applications
• ABM® Technology significantly extends battery service life
• True sine wave output delivers smooth, continuous power
• Buck and Boost Automatic Voltage Regulation corrects incoming voltage fluctuations
• Load segments enable scheduled shutdowns and extend backup time for critical devices
• Hot-swappable batteries minimize downtime, simplify service and extend service life of UPS
• Standard USB and RS232 serial ports extend communication capacity
• X-Slot™ card communication options extend power management capability
• Power management software (included) ensures data integrity
• Provides investment protection with a two-year limited warranty,
• 10-year pro-rated warranty, $150,000 load protection guarantee (U.S. and Canada)

Product Number	PW5115i-750VA
Capacity	750VA / 520W
Dimensions (HxWxD)	1.73 x 17.3 x 22.8 in
Unit Weight	41.1/18.8 lb/kg
Input Connections	IEC-320-10A
Output connections	(4) IEC-320-10A (C13)
Electrical Input
Nominal voltage	230V models are 220V, 230V or 240V user-selectable
Input voltage ranges	+\- 20% for nominal voltage at full load for user-selectable voltages
Operating frequency	50/60Hz, Auto-sensing
Frequency range	46-65Hz
Electrical Output
On utility voltage regulation	-10% to +6% of nominal
On battery voltage regulation	±5% RMS
Voltage wave shape (on battery)	Sine wave
Output protection	Electronic current limit
Communications
User interface	LED status display with AC power on, load Group, Overload, On Battery and General Alarm indicators, Site Wiring Fault Indicator on rear panel for low volt models.
Audible alarms	For various UPS alarm conditions, including: On Battery, Low Battery, Overload, UPS fault
Network transient protector	UL 497 A, In/out jacks RJ45 (high voltage models network protection) & RJ11 (low voltage models modem protection)
X-Slot optional	ConnectUPS-X Web/SNMP/xHub Card;
Communication cards	USB card ; X-Slot Relay card
Standard communications	1 x RS-232 Serial Port & 1 x USB Port
Cable	6-foot communications cable included
Power Management Software	Powerware Software Suite CD-ROM (bundled with UPS)
Battery
Battery type;	Sealed, lead-acid; maintenance free
Battery run time	See Battery Run Time chart
Battery replacement	Hot-swappable internal batteries
Recharge time	<3 hours to 90% usable capacity
Start-on-battery	Allows start of UPS without utility input
General
Diagnostics	Self-test @ power up
Transfer time	2-4 ms typical
Dimensions and weights	See Model Selection Guide
Overload (normal operation)	110% overload, shutdown after 3 minutes. 150% overload, shut down 10 cycles
Environmental
Safety markings	C-Tick; CE, TUV, cUL, UL
Safety conformance	UL1778, UL 497A (data lineonly); cUL (CAN/CSA C22.2, No. 107.1); EN 50091-1-1 and IEC 60950
EMC compliance	EN 50091-2. FCC Part 15subpart J Class A , ICES-003
Operating temperature	0 to 40º C (32 to 104º F)
Storage temperature	-15 to 50º C (5 to 122º F)
Relative humidity	5% to 95% non-condensing
Surge suppression	ANSI C62.41 Category A(formerly IEEE 587)
Audible noise	Less than 40 dBA typical
Altitude	Up to 3000M (10,000 ft) without derating

Powerware 5115 RM UPS File size 1.5 MB

Datasheet

Datasheet

Click on the link below to go to the page where this product can be found.

~750VA Line Interactive 230V 50/60Hz|PW5115iRM-750VA|~107511~107555~PWB5115i, 1U, Rackbox~

Powerware - 5115i 1000VA~

PW5115iRM-1000VA

1000VA

Line Interactive

230V

50/60Hz

~The Powerware 5115i Rackmount UPS delivers reliable backup power for all IT devices in the network system. As more and more IT devices are in Rackmount configurations an effective space saving UPS is needed to ensure clean power.

The Powerware 5115i RM design provides high power density, only occupying 1U (45 mm), which conserves valuable space in the rack for other equipment.

Powerware 5115i RM protects against five of the nine basic power problems that could harm your equipment or result in corrupted data

Line Interactive

1	2	3	4	5
Power Failure	Power Sag	Power Surge	Under Voltage	Over Voltage

Features:

• 1U rack height conserves valuable rack space
• Unique chassis design adapts to rackmount, wall mount, side cabinet (zero U), and bench top applications
• ABM® Technology significantly extends battery service life
• True sine wave output delivers smooth, continuous power
• Buck and Boost Automatic Voltage Regulation corrects incoming voltage fluctuations
• Load segments enable scheduled shutdowns and extend backup time for critical devices
• Hot-swappable batteries minimize downtime, simplify service and extend service life of UPS
• Standard USB and RS232 serial ports extend communication capacity
• X-Slot™ card communication options extend power management capability
• Power management software (included) ensures data integrity
• Provides investment protection with a two-year limited warranty,
• 10-year pro-rated warranty, $150,000 load protection guarantee (U.S. and Canada)

Product Number	PW5115i-1000VA
Capacity	1000VA / 670W
Dimensions (HxWxD)	1.73 x 17.3 x 22.8 in
Unit Weight	41.1/18.8 lb/kg
Input Connections	IEC-320-10A
Output connections	(4) IEC-320-10A (C13)
Electrical Input
Nominal voltage	230V models are 220V, 230V or 240V user-selectable
Input voltage ranges	+\- 20% for nominal voltage at full load for user-selectable voltages
Operating frequency	50/60Hz, Auto-sensing
Frequency range	46-65Hz
Electrical Output
On utility voltage regulation	-10% to +6% of nominal
On battery voltage regulation	±5% RMS
Voltage wave shape (on battery)	Sine wave
Output protection	Electronic current limit
Communications
User interface	LED status display with AC power on, load Group, Overload, On Battery and General Alarm indicators, Site Wiring Fault Indicator on rear panel for low volt models.
Audible alarms	For various UPS alarm conditions, including: On Battery, Low Battery, Overload, UPS fault
Network transient protector	UL 497 A, In/out jacks RJ45 (high voltage models network protection) & RJ11 (low voltage models modem protection)
X-Slot optional	ConnectUPS-X Web/SNMP/xHub Card;
Communication cards	USB card ; X-Slot Relay card
Standard communications	1 x RS-232 Serial Port & 1 x USB Port
Cable	6-foot communications cable included
Power Management Software	Powerware Software Suite CD-ROM (bundled with UPS)
Battery
Battery type;	Sealed, lead-acid; maintenance free
Battery run time	See Battery Run Time chart
Battery replacement	Hot-swappable internal batteries
Recharge time	<3 hours to 90% usable capacity
Start-on-battery	Allows start of UPS without utility input
General
Diagnostics	Self-test @ power up
Transfer time	2-4 ms typical
Dimensions and weights	See Model Selection Guide
Overload (normal operation)	110% overload, shutdown after 3 minutes. 150% overload, shut down 10 cycles
Environmental
Safety markings	C-Tick; CE, TUV, cUL, UL
Safety conformance	UL1778, UL 497A (data lineonly); cUL (CAN/CSA C22.2, No. 107.1); EN 50091-1-1 and IEC 60950
EMC compliance	EN 50091-2. FCC Part 15subpart J Class A , ICES-003
Operating temperature	0 to 40º C (32 to 104º F)
Storage temperature	-15 to 50º C (5 to 122º F)
Relative humidity	5% to 95% non-condensing
Surge suppression	ANSI C62.41 Category A(formerly IEEE 587)
Audible noise	Less than 40 dBA typical
Altitude	Up to 3000M (10,000 ft) without derating

Powerware 5115 RM UPS File size 1.5 MB

Datasheet

Datasheet

Click on the link below to go to the page where this product can be found.

~1000VA Line Interactive 230V 50/60Hz|PW5115iRM-1000VA|~107511~107556~PWB5115i, 1U, Rackbox~

Powerware - 5115i 1500VA~

PW5115iRM-1500VA

1500VA

Line Interactive

230V

50/60Hz

~The Powerware 5115i Rackmount UPS delivers reliable backup power for all IT devices in the network system. As more and more IT devices are in Rackmount configurations an effective space saving UPS is needed to ensure clean power.

The Powerware 5115i RM design provides high power density, only occupying 1U (45 mm), which conserves valuable space in the rack for other equipment.

Powerware 5115i RM protects against five of the nine basic power problems that could harm your equipment or result in corrupted data

Line Interactive

1	2	3	4	5
Power Failure	Power Sag	Power Surge	Under Voltage	Over Voltage

Features:

• 1U rack height conserves valuable rack space
• Unique chassis design adapts to rackmount, wall mount, side cabinet (zero U), and bench top applications
• ABM® Technology significantly extends battery service life
• True sine wave output delivers smooth, continuous power
• Buck and Boost Automatic Voltage Regulation corrects incoming voltage fluctuations
• Load segments enable scheduled shutdowns and extend backup time for critical devices
• Hot-swappable batteries minimize downtime, simplify service and extend service life of UPS
• Standard USB and RS232 serial ports extend communication capacity
• X-Slot™ card communication options extend power management capability
• Power management software (included) ensures data integrity
• Provides investment protection with a two-year limited warranty,
• 10-year pro-rated warranty, $150,000 load protection guarantee (U.S. and Canada)

Product Number	PW5115i-1500VA
Capacity	1500VA / 1000W
Dimensions (HxWxD)	1.73 x 17.3 x 22.8 in
Unit Weight	41.1/18.8 lb/kg
Input Connections	IEC-320-10A
Output connections	(4) IEC-320-10A (C13)
Electrical Input
Nominal voltage	230V models are 220V, 230V or 240V user-selectable
Input voltage ranges	+\- 20% for nominal voltage at full load for user-selectable voltages
Operating frequency	50/60Hz, Auto-sensing
Frequency range	46-65Hz
Electrical Output
On utility voltage regulation	-10% to +6% of nominal
On battery voltage regulation	±5% RMS
Voltage wave shape (on battery)	Sine wave
Output protection	Electronic current limit
Communications
User interface	LED status display with AC power on, load Group, Overload, On Battery and General Alarm indicators, Site Wiring Fault Indicator on rear panel for low volt models.
Audible alarms	For various UPS alarm conditions, including: On Battery, Low Battery, Overload, UPS fault
Network transient protector	UL 497 A, In/out jacks RJ45 (high voltage models network protection) & RJ11 (low voltage models modem protection)
X-Slot optional	ConnectUPS-X Web/SNMP/xHub Card;
Communication cards	USB card ; X-Slot Relay card
Standard communications	1 x RS-232 Serial Port & 1 x USB Port
Cable	6-foot communications cable included
Power Management Software	Powerware Software Suite CD-ROM (bundled with UPS)
Battery
Battery type;	Sealed, lead-acid; maintenance free
Battery run time	See Battery Run Time chart
Battery replacement	Hot-swappable internal batteries
Recharge time	<3 hours to 90% usable capacity
Start-on-battery	Allows start of UPS without utility input
General
Diagnostics	Self-test @ power up
Transfer time	2-4 ms typical
Dimensions and weights	See Model Selection Guide
Overload (normal operation)	110% overload, shutdown after 3 minutes. 150% overload, shut down 10 cycles
Environmental
Safety markings	C-Tick; CE, TUV, cUL, UL
Safety conformance	UL1778, UL 497A (data lineonly); cUL (CAN/CSA C22.2, No. 107.1); EN 50091-1-1 and IEC 60950
EMC compliance	EN 50091-2. FCC Part 15subpart J Class A , ICES-003
Operating temperature	0 to 40º C (32 to 104º F)
Storage temperature	-15 to 50º C (5 to 122º F)
Relative humidity	5% to 95% non-condensing
Surge suppression	ANSI C62.41 Category A(formerly IEEE 587)
Audible noise	Less than 40 dBA typical
Altitude	Up to 3000M (10,000 ft) without derating

Powerware 5115 RM UPS File size 1.5 MB

Datasheet

Datasheet

Click on the link below to go to the page where this product can be found.

~1500VA Line Interactive 230V 50/60Hz|PW5115iRM-1500VA|~107511~107557~PWB5115i, 1U, Rackbox~

Black Product Divider~~~~107511~107546~~

Layout Table~~~~107511~107718~~

5115i RM~

Powerware 5115 RM UPS File size 1.5 MB

Datasheet

Datasheet

~~~107511~107720~~