CMS - The Complete Solutions ProviderCable Management - Cabinets - Assynia - Hellermann Tyton
The PLANET FSD-803PE is a cost effective 8-port switch with 1-port 802.3af splitter built-in. The 8-port switch provides eight 10/100Mbps Fast Ethernet interfaces that can be directly installed as a small workgroup. Port#1 of the FSD-803PE also supports 802.3af Power over Ethernet Standard.more...
The PLANET FSD-803PE is a cost effective 8-port switch with 1-port 802.3af splitter built-in. The 8-port switch provides eight 10/100Mbps Fast Ethernet interfaces that can be directly installed as a small workgroup. Port#1 of the FSD-803PE also supports 802.3af Power over Ethernet Standard.Support dual power system, FSD-803PE either can be powered by 12VDC from the local AC outlet, or can be powered remotely through 802.3af Power over Ethernet standard. Port# 1 of the FSD-803PE supports IEEE802.3af Power over Ethernet standard that can negotiate with the remote 802.3af whether to feed the power or not. As soon as the network manager deploys the IEEE802.3af devices in the computer room such as the PLANET POE-150, the FSD-803PE can be powered from the POE equipment. For example, if there is a PC located at 200 meters away and would like to get connected, FSD-803PE would offer the most convenient way to make it. The manager needs simply to install FSD-803PE at the middle of the PC and the central network where 802.3af power over Ethernet feeding the power needed for the FSD-803PE. No additional power outlet is required.With Auto-MDI support, FSD-803PE can direct wire to any Ethernet / Fast Ethernet deices through Category-5 UTP cable. LED indictors help diagnose the activities of the switch. Product ApplicationsDepartment SwitchSupporting 802.3af power over Ethernet, the FSD-803PE can be installed as a small department switch that gets the power from central, power-managed network through its port#1. This shall help the network installer free to find an AC power outlet for this remote switch, and also free from power shutdown if a UPS is installed in the central computer room, and the power system is easily connected to the central network as well.Key FeaturesComplies with IEEE802.3, IEEE802.3u, IEEE802.3af Ethernet standards8-port 10/100Mbps Ethernet ports1-port (port#1) support 48VDC in-line powerDual power system, can be powered either from POE port or from local AC adapterHardware based 10/100Mbps, half / full-duplex and 1000Mbps full duplex mode, flow control and auto-negotiationIEEE802.3x flow control for full duplex operation and back pressure for half duplex operationIntegrated address look-up engine, support 2K absolute MAC addressesAutomatic address learning and address agingSupports Auto MDI/MDI-X functionSupports CSMA/CD protocolLED indicators for easy network diagnosticFCC, CE class A compliant
For cost saving and flexible using of PoE power provision, half of the 10/100Mbps TP ports of FSD-804PS provide PoE power injector function which is able to drive 4 IEEE802.3af compliant powered devices.For SOHO or department network, the switch also provides a simple, cost-effective, and highly reliable network connection for data as well as power. Furthermore, it is the ideal device for bridging among Ethernet, Fast Ethernet workgroups and networks.
For cost saving and flexible using of PoE power provision, half of the 10/100Mbps TP ports of FSD-804PS provide PoE power injector function which is able to drive 4 IEEE802.3af compliant powered devices.For SOHO or department network, the switch also provides a simple, cost-effective, and highly reliable network connection for data as well as power. Furthermore, it is the ideal device for bridging among Ethernet, Fast Ethernet workgroups and networks.With data and power over Ethernet from one unit, the FSD-804PS shall reduce cables and eliminates the need for dedicated electrical outlets on the wall, ceiling or any unreachable place. A wire carries both data and power lowering the installation costs, simplifying the installation effort and eliminating the need for electricians or extension cords. We are also proud of the key feature ¡V energy saving. With more efficient switching power supply, the efficiency of the FSD-804PS would be much better than four linear power adapters in a long run.Providing 4 PoE interfaces, the FSD-804PS is ideal for small business and workgroups requiring to deploy the PoE for the wireless access points, IP-based surveillance camera or IP phones in any places easily, efficiently and cost effective.The smart functions make it easy to survey and control the PoE power provision to the devices by the Web and Console interface. Basic switching functions such as VLAN, Trunk, QoS are available for network management. Product ApplicationDepartment/ Workgroup PoE Switch: Providing up to 4 PoE, in-line power interface, the switch can easily build a power central-controlled IP phone system, IP Camera system, AP group for the enterprise. For instance, 4 camera / AP can be easily installed around the corner in the company for surveillance demands or build a wireless roaming environment in the office. Without the power-socket limitation, the switch makes the installation of cameras or WLAN AP more easily and efficiently.Key Features8-Port 10/100Mbps Fast Ethernet ports4-Port support 48VDC power to PoE Powered Device.Hardware based 10/100Mbps auto-negotiation.Flow control for full duplex operation and back pressure for half duplex operationIntegrates address look-up engine, support 2K absolute MAC addressesAutomatic address learning and address agingSupports Auto MDI/MDI-X functionLED indicators for easy network diagnosticWeb/Console managementVLAN for network segregationPort trunk bandwidth aggregationPer port High/Low transmission priority configurationPoE power Disable/Enable by management interfacePoE power consumption monitoringEthernet standards comply with IEEE802.3 Ethernet, IEEE802.3u Fast Ethernet, IEEE802.3x Flow Control and IEEE802.3af Power over Ethernet.EMI standards comply with FCC, CE class A.
For cost saving and flexible using of PoE power provision, half of the 10/100Mbps TP ports of the FNSW-1608PS provide PoE power injector function which is able to drive 8 IEEE 802.3af compliant powered devices.For SOHO or department network, the FNSW-1608PS also provides a simple, cost-effective, and highly reliable network connection for data as well as power. Furthermore, it is the ideal device for bridging among Ethernet, Fast Ethernet workgroups and networks.With data and power over Ethernet from one unit, the FNSW-1608PS shall reduce cables and eliminates the need for dedicated electrical outlets on the wall, ceiling or any unreachable place. A wire carries both data and power lowering the installation costs, simplifying the installation effort and eliminating the need for electricians or extension cords. We are also proud of the key feature ¡V energy saving. With more efficient switching power supply, the efficiency of the FNSW-1608PS would be much better than four linear power adapters in a long run.Providing 8 PoE interfaces, the FNSW-1608PS is ideal for small business and workgroups requiring to deploy the PoE for the wireless access points, IP-based surveillance camera or IP phones in any places easily, efficiently and cost effective.The smart functions make it easy to survey and control the PoE power provision to the devices by the Web and Console interface. Basic switching functions such as VLAN, Trunk, QoS and bandwidth control are available for network management.
Another Power over Ethernet end-span product comes to PLANET PoE solution. The FGSW-2612PVS offers 12 PoE power injector TP ports on a 24-Port web smart Fast Ethernet switch which offers a flexible choice of PLANET PoE switches.more...
Another Power over Ethernet end-span product comes to PLANET PoE solution. The FGSW-2612PVS offers 12 PoE power injector TP ports on a 24-Port web smart Fast Ethernet switch which offers a flexible choice of PLANET PoE switches.Inherited from PLANET FGSW-2620PVS, the PLANET FGSW-2612PVS provides 24 10/100Mbps Fast Ethernet ports and 2 fixed 10/100/1000Mbps ports (either Gigabit copper or SFP) which also combines the Power over Ethernet technology that be able to supply standard 48VDC PoE power on the first 12 of the 24 10/100Mbps TP ports. The 2 additional gigabit TP/Mini-GBIC interfaces can be optionally connected with 10/100/1000Base-TX cable, 100Base-FX, or 1000Base-SX/LX fiber-optic cables which distance can be extended from 100 meters (TP), 2 kilometers (Multi-mode, ST or SC), up to 70 kilometers (Single-mode, SC / WDM / SFP).The switch is equipped with non-blocking 8.8Gbps backplane greatly simplify the tasks of upgrading your LAN to cater to increased bandwidth demands. The PoE, in-line power, following the standard IEEE802.3af, makes the switch able to power 24 PoE devices at the distance up to 100 meters through the 4-pair Cat 5/5e UTP wire.For efficient management, the Web Smart Switch is equipped with console and Web interface and can be programmed for basic switch management functions, such as port speed configuration, Port Trunking, VLAN, Port Mirroring, QoS, bandwidth control, PoE power inject priority and Misc Configuration including IP, password settings.The Switch provides port-based VLAN (including overlapping). The VLAN groups allowed on the switch will be maximally up to 26 for port-based VLAN. Via supporting port trunking, the Switch allows the operation of a high-speed trunk connecting to multiple ports. The Switch also provides seven groups of up to 4-ports for trunking, and it supports fail-over as well.
The For catering to the need of remote management and in-line power, PLANET releases two new Web Smart PoE (Power over Ethernet) Switches, the FGSW-2620PVS and FGSW-2402PVS.Inherited from PLANET FGSW-2402VS and 2620VSF, the PLANET FGSW-2620PVS provides 24 10/100Mbps Fast Ethernet ports and 2 fixed 10/100/1000Mbps ports (either Gigabit copper or SFP). And the FGSW-2402PVS offers 24 10/100Mbps Fast Ethernet ports with 2 open slots (port25, 26).more...
For catering to the need of remote management and in-line power, PLANET releases two new Web Smart PoE (Power over Ethernet) Switches, the FGSW-2620PVS and FGSW-2402PVS.Inherited from PLANET FGSW-2402VS and 2620VSF, the PLANET FGSW-2620PVS provides 24 10/100Mbps Fast Ethernet ports and 2 fixed 10/100/1000Mbps ports (either Gigabit copper or SFP). And the FGSW-2402PVS offers 24 10/100Mbps Fast Ethernet ports with 2 open slots (port25, 26). The two open slots can be installed by optionally 10/100Base-TX port, 1000Base-T port, 100Base-FX, or 1000Base-SX/LX fiber-optic interfaces. The distance can be extended from 100 meters (TP), 2 kilometers (Multi-mode, ST or SC), up to 70 kilometers (Single-mode, SC / WDM / SFP).Both switches are equipped with non-blocking 8.8Gbps backplane greatly simplify the tasks of upgrading your LAN to cater to increased bandwidth demands. The PoE, in-line power, following the standard IEEE802.3af, make the both switches able to power 24 PoE devices at the distance up to 100 meters through the 4-pair Cat 5/5e UTP wire.For efficient management, the Web Smart Switch is equipped with console and Web interface and can be programmed for basic switch management functions, such as port speed configuration, Port Trunking, VLAN, Port Mirroring, QoS, bandwidth control, PoE power inject priority and Misc Configuration including IP, password settings.The Switch provides port-based VLAN (including overlapping). The VLAN groups allowed on the switch will be maximally up to 26 for port-based VLAN. Via supporting port trunking, the Switch allows the operation of a high-speed trunk connecting to multiple ports. The Switch also provides seven groups of up to 4-ports for trunking, and it supports fail-over as well.
The PLANET WGSW-2620PV PoE Switch features Power-over-Ethernet (PoE), which optimizes the installation and power management of network devices such as wireless access points (AP), Voice over IP (VoIP) phones, and security video cameras. Power-over-Ethernet (IEEE 802.3af) capabilities reduce installation costs for many new network productivity devices. It frees the wireless AP deployment from restrictions due to power outlet locations. Power and data switching are integrated into one unit and delivered over a single cable, eliminating costs for additional AC wiring and reducing installation time. more...
The PLANET WGSW-2620PV PoE Switch features Power-over-Ethernet (PoE), which optimizes the installation and power management of network devices such as wireless access points (AP), Voice over IP (VoIP) phones, and security video cameras. Power-over-Ethernet (IEEE 802.3af) capabilities reduce installation costs for many new network productivity devices. It frees the wireless AP deployment from restrictions due to power outlet locations. Power and data switching are integrated into one unit and delivered over a single cable, eliminating costs for additional AC wiring and reducing installation time.With twenty-four 10/100Mbps RJ-45 ports, two GbE copper ports and two shared SFP / copper GbE interface, PLANET WGSW-2620PV boasts a high performance switch architecture that is capable of providing non-blocking switch fabric and wire-speed throughput as high as 8.8Gbps. Its four built-in GbE uplink ports also offer incredible extensibility, flexibility and connectivity to the Core switch or Servers.The IEEE 802 standard-based firmware provides a rich set of features and ensures interoperability with equipment from other vendors. Additionally, the firmware includes advanced features such as IGMP snooping, broadcast storm control, and MAC address filtering, to enhance security and bandwidth utilization.With its built-in web-based management, the PLANET WGSW-2620PV offers an easy-to-use, platform-independent management and configuration facility. The PLANET WGSW-2620PV supports standard Simple Network Management Protocol (SNMP) and can be managed via any standard-based management software. For text-based management, the WGSW-2620 can also be accessed via Telnet and the console port.An optional power supply, the UPS-400, can be chosen as UPS or redundant power for WGSW-2620PV. The WGSW-2620 can take electrical power from the AC outlet, the UPS-400 and both for redundant. The UPS-400 supports 400 watts of electrical power, once the AC power shut off, the UPS-400 then take over as the UPS power supply for WGSW-2620PV and keep the switch and the connected powered devices working.