Outdoor :CMS

Layout Table~~~~100870~100870~~

Banner~~~~100870~100879~~

New Layout Table~~~~100870~100878~~

Page Breadcrumb~~~~100870~100877~~

New Layout Table~~~~100870~107090~~

802.11g Wireless LAN Outdoor CPE AP~

~~~100870~107089~~

802.11g Wireless LAN Outdoor CPE AP |

New Layout Table~~~~100870~107088~~

Product Header~

Code

Description

~~~100870~107087~~

Planet WAP-6100~

WAP-6100

802.11g Wireless LAN Outdoor CPE AP

With the most innovative 802.11g technology designed, the WAP-6100 provides 54Mbps high data rate for outdoor environment, which is about 30 times faster than T1 and ADSL connection speed. There are four operating modes supported in WAP-6100 which are: AP, Wireless Client, Repeater, and Bridge. Except for 64/128/152-bit WEP encryption, WAP-6100 integrates WPA and WPA-PSK to secure the information of your wireless LAN.

The special designed housing allows the WAP-6100 to be installed in exposed locations under the rigorous weather conditions including heavy rain and wind. With web-based interface provided, the WAP-6100 is easy to be installed and managed. The PoE (Power over Ethernet) design reduces the cost of power cables installation and offers high flexibility while selecting the location of WAP-6100. All these advanced features and the built-in 12dBi patch antenna make WAP-6100 a suitable CPE solution for widely open space applications such as WISPs, campuses, and airports.

Product Application

Cost-effective LAN to LAN connection
It is an easy job to install wiring inside your own building, but it is hard if network cabling needs to route through some public areas or difficult wiring environments. A cost-effective solution is being provided now. The system integrator can use WAP-6000 with omni-directional antenna in central site, and apply several WAP-6100 on all satellite sites to connect these wired Ethernets together.

Key Features

Wireless LAN IEEE802.11b/g compliant
Solid housing provides protection against rigorous weather conditions
Four operating modes support: AP, Wireless Bridge, Wireless Client, and Repeater
Strong network security with 64/128/152-bit WEP encryption, WPA and WPA-PSK
Built-in 12dBi patch antenna
5 levels of adjustable transmit power control
Super G mode raises the data rate up to 108Mbps
Supports DHCP Client
Provides "Connection Status" indication for Repeater and Client modes
Power over Ethernet design

Product Specification

Model	WAP-6100
Standard	IEEE 802.11b, 802.11g
Signal Type	DSSS (Direct Sequence Spread Spectrum)
Modulation	OFDM with BPSK, QPSK, 16QAM, 64QAM, DBPSK, DQPSK, CCK
Port	10/100Mbps RJ-45 port * 1
Antenna Connector	Built-in 12dBi patch antenna
Output Power	18dBm@11Mbps / 17dBm@54Mbps (typical) 5 levels adjustable (Full, Half, Quarter, Eighth, Minimum)
Sensitivity	-74dBm@54Mbps OFDM, 10% PER -88dBm@11Mbps CCK, 8% PER
Operating Mode	AP, Wireless Bridge, Wireless Client, Repeater
Security	WEP setting Authentication type: Open System / Shared Key Shared keys input type: HEX / ASCII Shared keys length: (64-bit, 128-bit, 152-bit) Default WEP Key to use (1-4) WPA-PSK setting PassPhrase WPA Cipher Type (TKIP, AES) Group Key Update Interval: 300 WPA setting Radius Server IP Address Radius Port: 1812 WPA Cipher Type (TKIP, AES) Shared Key Group Key Update Interval: 300
Data Rate Super G mode	Up to 108Mbps
Data Rate 802.11g	Up to 54Mbps (6/9/12/18/24/36/48/54)
Data Rate 802.11b	Up to 11Mbps (1/2/5.5/11)
Dimensions (L x W x H)	185 x 106 x 62mm
Weight	400g
Environmental Specification	Operating temperature: -10 %7E 70 degree C Storage temperature: -30 %7E 80 degree C Relative humanity: 0% %7E 90% (non-condensing)
Power Requirement	48V DC, 0.4A
Electromagnetic Compatibility	FCC, CE

~802.11g Wireless LAN Outdoor CPE AP|WAP-6100|~100870~107086~wap-6100, 802.11g Wireless LAN Outdoor CPE AP,~

Black Product Divider~~~~100870~107085~~

New Layout Table~~~~100870~100876~~

802.11g Wireless LAN Outdoor AP with Bridge~

~~~100870~100875~~

802.11g Wireless LAN Outdoor AP with Bridge |

New Layout Table~~~~100870~100874~~

Product Header~

Code

Description

~~~100870~100873~~

Planet WAP-6000~

WAP-6000

802.11g Wireless LAN Outdoor AP with Bridge

Designed with the most innovative 802.11g technology, WAP-6000 provides 54Mbps high data rate for outdoor environment, which is about 30 times faster than T1 and ADSL connection speed. There are four operating modes supported in WAP-6000: AP, AP with WDS (Bridge), Wireless Client, and Repeater. The multiple operation modes selection makes WAP-6000 suitable for widely open space applications such as WISPs, campuses, and airports. In addition to 64/128/152-bit WEP encryption, WAP-6000 integrates WPA, and WPA-PSK to secure the information of your wireless LAN.

The special designed housing allows WAP-6000 to be installed in exposed locations under the rigorous weather conditions including heavy rain, wind, and snow. Provided with web-based interface, WAP-6000 is easy to be installed and managed. The PoE (Power over Ethernet) design reduces power cables installation cost and offers more flexibility while selecting the location of WAP-6000. With all these advanced features, WAP-6000 is the ideal solution for outdoor networks.

Product Application

AP mode
A first mile solution is now simple with PLANET WAP-6000. No wiring is needed and the bandwidth provided can be up to 54Mbps. By installing WAP-6000 equipped with omni-directional antenna in the user¡¦s neighborhood, all users around the AP can easily connect to the Internet through the access point by installing a wireless PCI card. By using a directional antenna, the distance between users and WAP-6000 can be easily extended.

Bridge mode
Wiring inside your own building may be an easy job, but it is hard if network cabling needs to route through some public areas or difficult wiring environments. WAP-6000 is dedicated to provide a high-speed solution for connecting two or more buildings¡¦ wired Ethernets together.

Key Features

Wireless LAN IEEE802.11b/g compliant
Solid housing provides protection against rigorous weather conditions
Four operating modes support: AP, AP with WDS (Bridge), Wireless Client, and Repeater
Strong network security with 64/128/152-bit WEP encryption, WPA and WPA-PSK
One detachable reverse N-type male connectors can connect to external antenna for expanding connection distance
5 levels of adjustable transmit power control
Super G mode raises the data rate up to 108Mbps
Support DHCP Client
Provides "Connection Status" indication for Repeater and Client modes
Power over Ethernet design

Product Specification

Model	WAP-6000
Standard	IEEE 802.11b, 802.11g
Signal Type	DSSS (Direct Sequence Spread Spectrum)
Modulation	OFDM with BPSK, QPSK, 16QAM, 64QAM, DBPSK, DQPSK, CCK
Port	10/100Mbps RJ-45 port * 1
Antenna Connector	Reverse N-type male * 1
Output Power	18dBm@11Mbps / 14dBm@54Mbps (typical) 5 levels adjustable (Full, Half, Quarter, Eighth, Minimum)
Sensitivity	-74dBm@54Mbps OFDM, 10% PER -88dBm@11Mbps CCK, 8% PER
Operating Mode	AP AP with WDS (Bridge) Wireless Client Repeater
Security	WEP setting Authentication type: Open System / Shared Key Shared keys input type: HEX / ASCII Shared keys length: (64-bit, 128-bit, 152-bit) Default WEP Key to use (1-4) WPA-PSK setting PassPhrase WPA Cipher Type (Auto, TKIP, AES) Group Key Update Interval: 300 WPA setting Radius Server IP Address Radius Port: 1812 WPA Cipher Type (Auto, TKIP, AES) Shared Key Group Key Update Interval: 300
Data Rate	Super G mode - Up to 108Mbps 802.11g - Up to 54Mbps (6/9/12/18/24/36/48/54) 802.11b - Up to 11Mbps (1/2/5.5/11)
Dimension	232 x 185 x 62 (mm) (L x W x H)
Weight	1130g
Temperature	-20%7E70ºC
Storage Temperature	-30%7E80ºC
Humidity	0%7E90% (non-condensing)
Power	12V DC, 2A
Electromagnetic Compatibility	FCC, CE

~802.11g Wireless LAN Outdoor AP with Bridge|WAP-6000|~100870~100872~wap-4000, wireless access point~

Black Product Divider~~~~100870~100871~~

New Layout Table~~~~100870~100885~~

802.11a Wireless LAN Outdoor Bridge~

~~~100870~100884~~

802.11a Wireless LAN Outdoor Bridge |

New Layout Table~~~~100870~100883~~

Product Header~

Code

Description

~~~100870~100882~~

Planet WAP-7000~

WAP-7000

802.11a Wireless LAN Outdoor Bridge

The WAP-7000 starts a new era for wireless building-to-building solution by providing high performance in 5GHz frequency. With 802.11a compliance, the WAP-7000 can avoid the interferences from other 802.11b/g devices and contributes the 54Mbps data rate. It is suited for enterprises, campus or off-site locations to extend existing wired network coverage.

The special designed housing allows WAP-7000 to be installed in exposed locations under the rigorous weather conditions including heavy rain, wind, and snow. Moreover, the WAP-7000 has built in the lightning protector for further protection. Provided with web-based interface, WAP-7000 is easy to be installed and managed. The POE (Power Over Ethernet) design reduces power cables installation cost and offers more flexibility when selecting the location of WAP-7000.

Product Application

Interference Immunity Wireless Backhaul
With the popularity of wireless network deployment, creating the zones that provide wireless access is quick and easy nowadays. However, the challenge lies in routing the network traffic between these zones. The WAP-7000 provides a wireless backhaul solution for such application. The local zone can be covered by an 802.11b/g wireless access point. The WAP-7000 which is connected to the same network can provide a non-interference and high speed backhaul link.

Key Features

Wireless LAN IEEE802.11a 5GHz compliant
Available channels selectable conforming to local radio restrictions on 802.11a standard
Solid housing provides protection against rigorous weather conditions
Point-to-Point, Point-to-MultiPoint bridge
Theoretically, the operating range can up to 17KM at 6Mbps data rate with 5GHz 18dBi antenna installed
Adjustable output power: 100mW, 50mW, 25mW, 13mW, and 6mW
Power over Ethernet design
Built-in lightning protector
Operating temperature: -20%7E70 degree C

Product Specification

Model	WAP-7000
Standard	IEEE802.11a IEEE802.3 IEEE802.3u
Interface	Wireless IEEE802.11a One 10/100 RJ-45 port
Data Rate	6, 9, 12, 18, 24, 36, 48, 54Mbps
Modulation	OFDM
RF Output Power	18dBm (typical)
Receiver Sensitivity	6 Mbps: -82dBm 9 Mbps: -81dBm 12 Mbps: -79dBm 18 Mbps: -77dBm 24 Mbps: -74dBm 36 Mbps: -70dBm 48 Mbps: -66dBm 54 Mbps: -65dBm
Media Access Technology	CSMA/CA
Lightning Protection	Built-in
Antenna Connector	N-Type
Dimension	320 x 910 x 48 (mm) (L x W x H)
Weight	3.05Kg
Temperature	-20%7E70ºC
Storage Temperature	-40%7E80ºC
Humidity	10%7E90% (non-condensing)
Power	48V DC, 1.7A (proprietary PoE)
Electromagnetic Compatibility	FCC, CE

~802.11a Wireless LAN Outdoor Bridge|WAP-7000|~100870~100881~wap-4000, wireless access point~

Black Product Divider~~~~100870~100880~~

Menu Page | Toolbar Page |

Frameset Page | Index Page | Table of Contents
EROL - Electronic Retail Online E-commerce shopping cart software