Page Loading…

CMS - The Complete Solutions Provider
Cable Management - Cabinets - Assynia - Hellermann Tyton

Layout Table~~~~100746~100746~~
Banner~~~~100746~100750~~
New Layout Table~~~~100746~100749~~
Page Breadcrumb~~~~100746~100748~~
New Layout Table~~~~100746~100738~~
Fast Ethernet Media Converters 703~

The PLANET FT-70X is Fast Ethernet 100Base-FX fiber to 100Base-TX shielded twisted pair (STP) converter. The converter auto-adapts to the highest level of performance supported by the device connected to the STP port.more...

~~~100746~100737~~
Fast Ethernet Media Converters 703 |
New Layout Table~~~~100746~100736~~
Product Header~
CodeDescription
~~~100746~100735~~
FT-703~
 FT-703100 Base-TX to 100Base - FX (MT-RJ)
Multi-Mode Fiber Converter
~

The PLANET FT-70X is Fast Ethernet 100Base-FX fiber to 100Base-TX shielded twisted pair (STP) converter. The converter auto-adapts to the highest level of performance supported by the device connected to the STP port. When the device is a switch or a workstation that supports full duplex, the converter adapts to the full-duplex mode and provides an effective 200Mbps bandwidth. When the connected device is a hub or a workstation that supports only half duplex, the converter adapts to the half-duplex mode and provides the nominal 100Mbps bandwidth. In fiber-optic interface. The fiber port of converter operates at 1310 nm and uses ST, SC, MT-RJ VF-45 or WDM connectors. Multi-mode models that support distances up to 2 km and single-mode models that support distances up to 15/35/50 km are available.



Key Features
  • Comply with IEEE802.3, IEEE802.3u 10/100Base-TX, 100Base-FX Standard
  • Connectors: One RJ-45 Twisted Pair, EIA568
  • One Fiber-optic, 1310nm wavelength, connector-type and distance vary with model# FT-706A15: Tx-1310nm, Rx-1550nm
    • FT-706B15: Tx-1550nm, Rx-1310nm
  • Data Transfer Rate:
    • TP: 100Mbps
    • FX: 100Mbps
  • Duplex mode support: Full or half-duplex mode by Auto- Negotiation (TP)
  • LED indicators: PWR, TX-LNK, TX-ACT, FX-LNK, FX-ACT, FDX
Product Specification

Model FT-703
Protocol IEEE 802.3u, 100Base-FX, 100Base-TX
Dimensions 70 x 97 x 26 mm (W x D x H)
Weight 0.2kg
Power 5V DC, 2A, max.


Connectors and Cables
Twisted Pair / STP RJ45, Category 5 (EIA/TIA 568)
Fiber-optic MT-RJ
Multi-mode cable 50/125, 62.5/125 µm


Supported Distances and function
Twisted Pair STP 100 m / 328 ft.
Multi-mode Fiber Optic 2 km / 1.2 mile. (Full-Duplex)
Port Mode TP: Half and Full Duplex, auto-negotiation


Environmental
Temperature 0 to 50 degrees C
Humidity 5-90% (non-condensing)

~100 Base-TX to 100Base - FX (MT-RJ) %3Cbr%3E Multi-Mode Fiber Converter|FT-703|~100746~100734~ft-801, media converter~
Black Product Divider~~~~100746~100733~~
Menu Page | Toolbar Page |
Frameset Page | Index Page | Table of Contents
EROL - Electronic Retail Online E-commerce shopping cart software