Page Loading…

CMS - The Complete Solutions Provider
Cable Management - Cabinets - Assynia - Hellermann Tyton

Layout Table~~~~100674~100674~~
Banner~~~~100674~100677~~
New Layout Table~~~~100674~100676~~
Page Breadcrumb~~~~100674~100675~~
New Layout Table~~~~100674~100726~~
New Layout Table~~~~100674~99642~~
Fast Ethernet Bridge Media Converter (ST)~

The PLANET FT-80x is Fast Ethernet Bridge 100Base-FX fiber to 10/100Base-TX shielded twisted pair (STP) converter. It supports selectable for half-duplex and full-duplex operations and supports a variety of fiber options. The converter auto-adapts to the highest level of performance supported by the device connected to the STP port.more...

~~~100674~99641~~
Fast Ethernet Bridge Media Converter (ST) |
New Layout Table~~~~100674~99640~~
Product Header~
CodeDescription
~~~100674~100678~~
FT-801 (ST)~
 FT-801Fast Ethernet Bridge Media Converter (ST)
~

The PLANET FT-80x is Fast Ethernet Bridge 100Base-FX fiber to 10/100Base-TX shielded twisted pair (STP) converter. It supports selectable for half-duplex and full-duplex operations and supports a variety of fiber options. The converter auto-adapts to the highest level of performance supported by the device connected to the STP port. When the device is a switch or a workstation that supports full duplex, the converter adapts to the full-duplex mode and provides an effective 200Mbps bandwidth. When the connected device is a hub or a workstation that supports only half duplex, the converter adapts to the half-duplex mode and provides the nominal 100Mbps bandwidth. An override switch provides total manual control over the half/full-duplex operation, in fiber-optic interface. The fiber port of converter operates at 1310 nm and uses ST, SC, MT-RJ, VF-45 or WDM connectors. Multi-mode models that support distances up to 2 km and single-mode models that support distances up to 15/35/50 km are available.

The FT-80x series are with LFP (Link Fault Pass Through function) (LLCF/LLR) and the DIP Switch design. LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitor the net. The DIP Switch provides disable or enable the LFP function.

LLCF (Link Loss Carry Forward) means when a device connected to the converter and the TP line loss the link, the converter's fiber will disconnect the link of transmit. LLR (Link Loss Return) means when a device connected to the converter and the fiber line loss the link, the converter's fiber will disconnect the link of transmit. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitor the net.



Key Features
  • Comply with IEEE802.3, IEEE802.3u 10/100Base-TX, 100Base-FX Standard
  • Connectors: One RJ-45 (Auto-MDI/MDI-X) Twisted Pair, EIA568
  • One Fiber-optic, 1310nm wavelength, connector-type and distance vary with model.
    • FT-806A20: Tx-1310nm, Rx-1550nm
    • FT-806B20: Tx-1550nm, Rx-1310nm
  • Data Transfer Rate:
    • TP: 10/100Mbps
    • FX: 100Mbps
  • Duplex mode support:
    • Full or half-duplex mode by Auto- Negotiation (TP)
    • Full or half-duplex mode by DIP-switch (FX)
  • LED indicators: PWR, FX LNK/ACT, FX FDX/COL, TP 100, TP LNK/ACT, TP FDX/COL
  • DIP-switch: 2 DIP-switches
    • Rear DIP-switch: FX duplex mode selection
    • Side DIP-switch: LFP (Link Fault Pass-through) mode selection
Product Specification

Model FT-801
Protocol IEEE 802.3u, 100Base-FX, 100Base-TX
Dimensions 70 x 97 x 26 mm (W x D x H)
Weight 0.2kg
Power 5V DC, 2A, max.


Connectors and Cables
Twisted Pair / STP RJ45, Category 5 (EIA/TIA 568)
Fiber-optic ST
Multi-mode cable 50/125, 62.5/125 µm


Supported Distances and function
Twisted Pair STP 100 m / 328 ft.
Multi-mode Fiber Optic 412 m / 1,350 ft. (Half-Duplex)
2 km / 1.2 mile. (Full-Duplex)
Port Mode TP: Half and Full Duplex, auto-negotiation
FX: Half and Full Duplex via DIP switch


Environmental
Temperature 0 to 50 degrees C
Humidity 5-90% (non-condensing)

~Fast Ethernet Bridge Media Converters (ST)|FT-801|~100674~99638~ft-801, media converter~
Black Product Divider~~~~100674~99637~~
New Layout Table~~~~100674~99648~~
Fast Ethernet Bridge Media Converter (SC) Multi-Mode~

The PLANET FT-80x is Fast Ethernet Bridge 100Base-FX fiber to 10/100Base-TX shielded twisted pair (STP) converter. It supports selectable for half-duplex and full-duplex operations and supports a variety of fiber options. The converter auto-adapts to the highest level of performance supported by the device connected to the STP port.more...

~~~100674~99647~~
Fast Ethernet Bridge Media Converter (SC) Multi-Mode |
New Layout Table~~~~100674~99646~~
Product Header~
CodeDescription
~~~100674~100679~~
FT-802 (SC) Multi-Mode~
 FT-802Fast Ethernet Bridge Media Converter (SC)
~

The PLANET FT-80x is Fast Ethernet Bridge 100Base-FX fiber to 10/100Base-TX shielded twisted pair (STP) converter. It supports selectable for half-duplex and full-duplex operations and supports a variety of fiber options. The converter auto-adapts to the highest level of performance supported by the device connected to the STP port. When the device is a switch or a workstation that supports full duplex, the converter adapts to the full-duplex mode and provides an effective 200Mbps bandwidth. When the connected device is a hub or a workstation that supports only half duplex, the converter adapts to the half-duplex mode and provides the nominal 100Mbps bandwidth. An override switch provides total manual control over the half/full-duplex operation, in fiber-optic interface. The fiber port of converter operates at 1310 nm and uses ST, SC, MT-RJ, VF-45 or WDM connectors. Multi-mode models that support distances up to 2 km and single-mode models that support distances up to 15/35/50 km are available.

The FT-80x series are with LFP (Link Fault Pass Through function) (LLCF/LLR) and the DIP Switch design. LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitor the net. The DIP Switch provides disable or enable the LFP function.

LLCF (Link Loss Carry Forward) means when a device connected to the converter and the TP line loss the link, the converter's fiber will disconnect the link of transmit. LLR (Link Loss Return) means when a device connected to the converter and the fiber line loss the link, the converter's fiber will disconnect the link of transmit. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitor the net.



Key Features
  • Comply with IEEE802.3, IEEE802.3u 10/100Base-TX, 100Base-FX Standard
  • Connectors: One RJ-45 (Auto-MDI/MDI-X) Twisted Pair, EIA568
  • One Fiber-optic, 1310nm wavelength, connector-type and distance vary with model.
    • FT-806A20: Tx-1310nm, Rx-1550nm
    • FT-806B20: Tx-1550nm, Rx-1310nm
  • Data Transfer Rate:
    • TP: 10/100Mbps
    • FX: 100Mbps
  • Duplex mode support:
    • Full or half-duplex mode by Auto- Negotiation (TP)
    • Full or half-duplex mode by DIP-switch (FX)
  • LED indicators: PWR, FX LNK/ACT, FX FDX/COL, TP 100, TP LNK/ACT, TP FDX/COL
  • DIP-switch: 2 DIP-switches
    • Rear DIP-switch: FX duplex mode selection
    • Side DIP-switch: LFP (Link Fault Pass-through) mode selection
Product Specification

Model FT-802
Protocol IEEE 802.3u, 100Base-FX, 100Base-TX
Dimensions 70 x 97 x 26 mm (W x D x H)
Weight 0.2kg
Power 5V DC, 2A, max.


Connectors and Cables
Twisted Pair / STP RJ45, Category 5 (EIA/TIA 568)
Fiber-optic SC
Multi-mode cable 50/125, 62.5/125 µm


Supported Distances and function
Twisted Pair STP 100 m / 328 ft.
Multi-mode Fiber Optic 412 m / 1,350 ft. (Half-Duplex)
2 km / 1.2 mile. (Full-Duplex)
Port Mode TP: Half and Full Duplex, auto-negotiation
FX: Half and Full Duplex via DIP switch


Environmental
Temperature 0 to 50 degrees C
Humidity 5-90% (non-condensing)

~Fast Ethernet Bridge Media Converters (SC)|FT-802|~100674~99644~ft-802, media converter~
Black Product Divider~~~~100674~99643~~
New Layout Table~~~~100674~100697~~
Fast Ethernet Bridge Media Converter (SC) Multi-Mode~

The PLANET FT-80x is Fast Ethernet Bridge 100Base-FX fiber to 10/100Base-TX shielded twisted pair (STP) converter. It supports selectable for half-duplex and full-duplex operations and supports a variety of fiber options. The converter auto-adapts to the highest level of performance supported by the device connected to the STP port.more...

~~~100674~100696~~
Fast Ethernet Bridge Media Converter (SC) Multi-Mode |
New Layout Table~~~~100674~100695~~
Product Header~
CodeDescription
~~~100674~100694~~
FT-803 (MT-RJ) Multi-Mode~
 FT-803Fast Ethernet Bridge Media Converter (MT-RJ)
~

The PLANET FT-80x is Fast Ethernet Bridge 100Base-FX fiber to 10/100Base-TX shielded twisted pair (STP) converter. It supports selectable for half-duplex and full-duplex operations and supports a variety of fiber options. The converter auto-adapts to the highest level of performance supported by the device connected to the STP port. When the device is a switch or a workstation that supports full duplex, the converter adapts to the full-duplex mode and provides an effective 200Mbps bandwidth. When the connected device is a hub or a workstation that supports only half duplex, the converter adapts to the half-duplex mode and provides the nominal 100Mbps bandwidth. An override switch provides total manual control over the half/full-duplex operation, in fiber-optic interface. The fiber port of converter operates at 1310 nm and uses ST, SC, MT-RJ, VF-45 or WDM connectors. Multi-mode models that support distances up to 2 km and single-mode models that support distances up to 15/35/50 km are available.

The FT-80x series are with LFP (Link Fault Pass Through function) (LLCF/LLR) and the DIP Switch design. LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitor the net. The DIP Switch provides disable or enable the LFP function.

LLCF (Link Loss Carry Forward) means when a device connected to the converter and the TP line loss the link, the converter's fiber will disconnect the link of transmit. LLR (Link Loss Return) means when a device connected to the converter and the fiber line loss the link, the converter's fiber will disconnect the link of transmit. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitor the net.



Key Features
  • Comply with IEEE802.3, IEEE802.3u 10/100Base-TX, 100Base-FX Standard
  • Connectors: One RJ-45 (Auto-MDI/MDI-X) Twisted Pair, EIA568
  • One Fiber-optic, 1310nm wavelength, connector-type and distance vary with model.
    • FT-806A20: Tx-1310nm, Rx-1550nm
    • FT-806B20: Tx-1550nm, Rx-1310nm
  • Data Transfer Rate:
    • TP: 10/100Mbps
    • FX: 100Mbps
  • Duplex mode support:
    • Full or half-duplex mode by Auto- Negotiation (TP)
    • Full or half-duplex mode by DIP-switch (FX)
  • LED indicators: PWR, FX LNK/ACT, FX FDX/COL, TP 100, TP LNK/ACT, TP FDX/COL
  • DIP-switch: 2 DIP-switches
    • Rear DIP-switch: FX duplex mode selection
    • Side DIP-switch: LFP (Link Fault Pass-through) mode selection
Product Specification

Model FT-803
Protocol IEEE 802.3u, 100Base-FX, 100Base-TX
Dimensions 70 x 97 x 26 mm (W x D x H)
Weight 0.2kg
Power 5V DC, 2A, max.


Connectors and Cables
Twisted Pair / STP RJ45, Category 5 (EIA/TIA 568)
Fiber-optic MT-RJ
Multi-mode cable 50/125, 62.5/125 µm


Supported Distances and function
Twisted Pair STP 100 m / 328 ft.
Multi-mode Fiber Optic 412 m / 1,350 ft. (Half-Duplex)
2 km / 1.2 mile. (Full-Duplex)
Port Mode TP: Half and Full Duplex, auto-negotiation
FX: Half and Full Duplex via DIP switch


Environmental
Temperature 0 to 50 degrees C
Humidity 5-90% (non-condensing)

~Fast Ethernet Bridge Media Converters (MT-RJ)|FT-803|~100674~100693~ft-802, media converter~
Black Product Divider~~~~100674~100692~~
New Layout Table~~~~100674~99673~~
Fast Ethernet Bridge Media Converter (SC) Single-Mode 15Km~

The PLANET FT-80x is Fast Ethernet Bridge 100Base-FX fiber to 10/100Base-TX shielded twisted pair (STP) converter. It supports selectable for half-duplex and full-duplex operations and supports a variety of fiber options. The converter auto-adapts to the highest level of performance supported by the device connected to the STP port.more...

~~~100674~99672~~
Fast Ethernet Bridge Media Converter (SC) Single-Mode 15Km |
New Layout Table~~~~100674~99671~~
Product Header~
CodeDescription
~~~100674~100680~~
FT-802S15 (SC) Single-Mode 15Km~
 FT-802S15Fast Ethernet Bridge Media Converter (SC) Single-Mode 15Km
~

The PLANET FT-80x is Fast Ethernet Bridge 100Base-FX fiber to 10/100Base-TX shielded twisted pair (STP) converter. It supports selectable for half-duplex and full-duplex operations and supports a variety of fiber options. The converter auto-adapts to the highest level of performance supported by the device connected to the STP port. When the device is a switch or a workstation that supports full duplex, the converter adapts to the full-duplex mode and provides an effective 200Mbps bandwidth. When the connected device is a hub or a workstation that supports only half duplex, the converter adapts to the half-duplex mode and provides the nominal 100Mbps bandwidth. An override switch provides total manual control over the half/full-duplex operation, in fiber-optic interface. The fiber port of converter operates at 1310 nm and uses ST, SC, MT-RJ, VF-45 or WDM connectors. Multi-mode models that support distances up to 2 km and single-mode models that support distances up to 15/35/50 km are available.

The FT-80x series are with LFP (Link Fault Pass Through function) (LLCF/LLR) and the DIP Switch design. LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitor the net. The DIP Switch provides disable or enable the LFP function.

LLCF (Link Loss Carry Forward) means when a device connected to the converter and the TP line loss the link, the converter's fiber will disconnect the link of transmit. LLR (Link Loss Return) means when a device connected to the converter and the fiber line loss the link, the converter's fiber will disconnect the link of transmit. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitor the net.



Key Features
  • Comply with IEEE802.3, IEEE802.3u 10/100Base-TX, 100Base-FX Standard
  • Connectors: One RJ-45 (Auto-MDI/MDI-X) Twisted Pair, EIA568
  • One Fiber-optic, 1310nm wavelength, connector-type and distance vary with model.
    • FT-806A20: Tx-1310nm, Rx-1550nm
    • FT-806B20: Tx-1550nm, Rx-1310nm
  • Data Transfer Rate:
    • TP: 10/100Mbps
    • FX: 100Mbps
  • Duplex mode support:
    • Full or half-duplex mode by Auto- Negotiation (TP)
    • Full or half-duplex mode by DIP-switch (FX)
  • LED indicators: PWR, FX LNK/ACT, FX FDX/COL, TP 100, TP LNK/ACT, TP FDX/COL
  • DIP-switch: 2 DIP-switches
    • Rear DIP-switch: FX duplex mode selection
    • Side DIP-switch: LFP (Link Fault Pass-through) mode selection
Product Specification

Model FT-802
Protocol IEEE 802.3u, 100Base-FX, 100Base-TX
Dimensions 70 x 97 x 26 mm (W x D x H)
Weight 0.2kg
Power 5V DC, 2A, max.


Connectors and Cables
Twisted Pair / STP RJ45, Category 5 (EIA/TIA 568)
Fiber-optic SC
Single-Mode (SM) cable 9/125 µm


Supported Distances and function
Twisted Pair STP 100 m / 328 ft.
Single Mode (SM) 15Km / 9 mile (Full - Duplex)
Port Mode TP: Half and Full Duplex, auto-negotiation
FX: Half and Full Duplex via DIP switch


Environmental
Temperature 0 to 50 degrees C
Humidity 5-90% (non-condensing)

~Fast Ethernet Bridge Media Converters (SC)|FT-802S15|~100674~99669~ft-802S15, media converter~
Black Product Divider~~~~100674~99668~~
Menu Page | Toolbar Page |
Frameset Page | Index Page | Table of Contents
EROL - Electronic Retail Online E-commerce shopping cart software